MoYu WeiLong WR M V9 3×3 — Ball Core UV MagLev: “top-spec” WR flagship with ball core, MagLev and UV coating

MoYu WeiLong WR M V9 3×3 — Ball Core UV MagLev is the most “fully loaded” version of the ninth-generation WR: it combines a corner-to-core magnetic ball core, a MagLev system instead of springs, a full magnetic layout and a UV-coated shell. The cube is built for maximum speed, strong layer auto-alignment and high stability at very high TPS.

In terms of feel, this is a fast, “floaty” WR flagship with very dense magnetic control: the ball core makes the construction solid and predictable, MagLev removes friction and gives a light turn, and the UV surface provides a secure grip even during long and intensive sessions.

Who is this cube for

Skill level:

• advanced and top-level speedcubers with confident TPS and solid technique;
• competition cubers who want an extremely fast WR main with strong auto-alignment support;
• fans of the WeiLong WR series who want the full package: Ball Core + MagLev + UV.

Age:

• teenagers and adults;
• also suitable for motivated kids who already solve 3×3 confidently on time and are used to fast cubes.

Main use cases:

• intensive speed training and chasing personal bests;
• main 3×3 competition cube;
• upgrade from regular magnetic and spring-based flagships to the most “high-tech” WR version.

Turning feel

• turning is very fast and light — MagLev removes spring/washer friction, the cube offers almost no resistance;
• the character is smooth and “floaty”, turns flow easily into each other during algorithm spam;
• the ball core gives a “rail-like” effect: layers clearly tend to recenter and “finish” the move after each turn;
• magnetic clicks are noticeable but not harsh — you get a sense of controlled speed rather than “brakes”;
• sound is moderately quiet, with a slight “glossy” tone from the tight geometry and UV surface.

Out of the box, WR M V9 Ball Core UV MagLev is usually set fairly loose and feels very fast. If you want more control and a “tighter” feel, you can slightly increase the tension and use a thicker lube.

Ball core, MagLev and magnetic system

Corner-to-core magnetic ball core:

• magnets in the corners attract to the core, so layers actively tend to align after a turn;
• micro-misalignments are reduced, the cube “wobbles” less at high TPS;
• the construction feels solid and stable even under very aggressive turning.

MagLev instead of springs:

• classic springs are replaced with a pair of repelling magnetic rings in the center;
• no spring/washer friction — turning becomes faster, more even and quieter;
• no spring squeak, less wear of the tensioning system over time;
• at the same time, the cube is still adjustable by tension and center “stiffness.”

Layer magnets and adjustment:

• edge–corner magnets provide basic magnetic layer alignment;
• combined with the ball core they create a dense magnetic field: high control without feeling like “anchors”;
• depending on the batch, magnet strength adjustment (several levels) may be available, letting you make the cube feel “stickier” or freer.

Stability and corner-cutting

• modern forward corner-cutting — the cube confidently cuts large angles without harsh lockups;
• reverse corner-cutting is at a high level, forgiving small misalignments;
• ball core + MagLev help layers snap back into place quickly during algorithm spam;
• anti-pop construction and anti-twist corner design reduce the risk of pops and corner twists even at very high TPS.

Size, weight, materials

• Size: about 55.5 × 55.5 × 55.5 mm — modern WR flagship standard;
• Weight: around 65–70 g — slightly heavier than the base version due to the ball core and MagLev, but without feeling like a “brick”;
• Shell: stickerless, bright high-contrast color scheme, easy to read at speed;
• Surface: UV coating — glossy, very grippy surface, resistant to scratches and wear;
• Internals: light (primary) plastic with texturing and channels to reduce friction and improve smoothness.

Key advantages of MoYu WeiLong WR M V9 3×3 — Ball Core UV MagLev

• maximum WR V9 configuration: ball core + MagLev + full magnetic layout + UV coating;
• very fast and light turning with strong layer auto-alignment;
• high stability at top TPS thanks to the magnetic core and refined mechanism;
• modern center system with stepped adjustment — easy to tune the cube to your style;
• UV surface provides excellent grip even with sweaty hands and handles intensive training very well;
• ideal as a 3×3 competition main and as the “top-tier” upgrade in the WR M V9 line.

Who it may not suit / nuances

• for beginners and fans of very calm cubes, this version may feel too fast and “nervous” — it’s easier to start with the standard spring or non-core WR versions;
• if you prefer heavier and “slower” flagships, you’ll need careful setup (tighter tensions and thicker lube);
• to unlock full potential, the cube needs some time: tuning center tension, magnet strength (if adjustable) and lube choice to your turning style.

MoYu WeiLong WR M V9 3×3 — Ball Core UV MagLev is the choice for speedcubers who need an extremely fast, high-tech and “fully loaded” WR flagship with a magnetic core and MagLev, ready to withstand the most aggressive solves and serious 3×3 competitions.